Chinese Knotting: The 6 Cloverleaf Knot

[ The Cloverleaf Knot ] [ Home ][ Books ][ Links ][ Supplies][ Glossary ][ Blog ][ About ]

step 1:
form 2 loops as in step 1 of the 4 cloverleaf, and pin the result together with a bobby pin

step 2:
form a third loop and insert it through both of the first 2 loops

step 3:
form a fourth loop and insert it through the previous 2 loops (2 & 3)

step 4:
take the free end and insert it through the previous 2 loops (3 & 4)
over the starting end (and the pin), then down through the first petal

step 5:
take the free end under the starting end (and the pin),
then back through the same 2 loops (3 & 4) in the reverse direction

step 6:
take the free end and insert it through loop 4
the starting end and the pin will be between loops 4 & 5, pass over those
insert the free end through the top part of loop 5
then take the free end through the second petal

step 7:
insert the free end through the bottom part of loop 5 (you'll might want to turn the knot over)
under the starting end and pin
then back through the 4th loop

step 8:
the knot is now done except for the the tightening
it is often useful to leave the pin in place for the first stage of tightening as it helps to provide structure and clues as to what are centre loops and what are petals
tighten in all directions, taking up slack until the centre is tight and there is clear distinction between centre and petals

step 8a:
taking the pin out, it is helpful to hold the centre of the knot firmly with the fingers of one hand while tightening by pulling on the petals and ends with the other

step 8b:
the pin can also be inserted into the very centre of the knot to help guide the formation of symmetry as further tightening, slack removal, and petal shaping continues

CLW

Creation Date: Mon Aug 17 21:28:55 PDT 1998
Last Modified: Friday, 15-Apr-2016 23:50:43 UTC
Page accessed at local time: Saturday, 21-Dec-2024 14:01:55 UTC