The Multiple OH Knot

多重止結, 多重止结, 多重止め結び, 다중 옭매듭

As one might expect, to tie a multiple OH knot, one tucks the working end through the initial loop as many times as desired. This is not complicated. What is annoying is moving such a knot to a particular place on a cord after it has been tied as might be required for a decorative knot. At this point it is helpful to have tools. Many and varied are the options ranging from a scrap of cord to gripfids, but cheap and easy to source is a simple drinking straw. Here, I cut a short straw segment to help tie my knot near its desired final location to minimize the fuss involved in moving a tied multiple OH knot.

Tying

  1. step 1 Lay the standing part of the cord along the straw, wrap a full turn around the straw, crossing over the standing part.
  2. step 2 Coil the working part around the straw as many times as desired. If a particular number is needed, count the number of times the standing part is crossed.
  3. step 3 Tuck the working end into the straw. Make sure the working end is past the standing part to get the right count.
  4. step 4 Guide the working end through the straw and pull through the coil. Once the working end is safely through the entire coil, the straw can be removed.

Tighten

Even with a tool, the knot will still require slack removal, massage, and finessing to reach its final form. Also, be warned that wraps/twists that should be on the outside can disappear into the interior of the knot.

  1. triple Tightened triple OH knot.
  2. quadruple Tightened quadruple OH knot.
  3. quintuple Tightened quintuple OH knot.
  4. long Quipu long knot.

Nomenclature

While you'd often be using the ordinal number of the size of the knot such as "quadruple OH knot", as a group the question was whether to use "long" or "multiple". The quipu unit knots are called "long" knots. They are the same knots but tightened differently.

Unfortunately, my books don't name multiple overhands as a group. Extrapolating from "止結" to "多重止結" gives us a search term that does not produce any results. The internet, at least, seems to want to use "多重反手結". The only site that I briefly thought agreed with me, actually uses "多重單結".

For consistency sake, in any case, at least on my sites, I'm using 多重止结, 多重止め結び, and 다중 옭매듭.

See Also